Aluminium table with parallel action arm design which allows quick and accurate cuts. Incorporates a worklight and flexible shaft suitable for use with Draper Multi-Tool accessories. The dust blower keeps the cutting line clear and a dust extraction facility removes unwanted dust when connected to a dust extractor. The worktable tilts from 0-45 deg. Uses 125mm pin end blades and pin less fretsaw blades in-conjunction with blade clamp holder. Fitted with cable and approved plug.
| Item No. | SS1601 |
| Voltage/Frequency | 110V/230V~50Hz/60Hz |
| Input Power | 120W(DC MAGNETIC MOTOR) |
| No-load Speed | 400-1600/min |
| Saw Blade Size | 125mm |
| Steel Table Size | 415*250mm |
| Table Tilt Range | 0°-45° |
| Max. Cutting Depth | 50mm At 90°, 23mm At 45° |
| Max. Cutting Width | 406mm |
| Qty/Ctn | 1pc |
| G.W/N.W | 20/16.5kg |
| Dimensions | 80.5x58x47.5cm |
| Qty/20GP | 135pcs |
1.Unique side panel flips open for easy-access blade changes;
2.Variable speed goes from 400 to 1600 strokes per minute;
3.Spacious 415 by 250mm table bevels up to 45 degrees for angled cuts;
4.Cuts wood up to 50mm thick with a 406mm throat depth;
5.Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a dust port, a foot lock clamp.
